If you get a warning message on your computer telling you that your hard drive is going to fail the first thing that goes through your head is to switch it off and call a technician. If you do not fix this problem quickly you will find your drive will fail and you will lose all your data. If the hard drive is faulty you will also need to replace it and reinstall windows and every piece of software and the drivers for your hardware.
If this happens to you the first thing you need to do is to verify it is really a hard drive problem and not malware or a software errors on your computer causing this error. If you take your computer to a shop to fix it they may just replace the hard drive when it is not even faulty. Carrying out some simple steps can save you a lot of money and let you get rid of this error fast if it is not a hardware problem.
Here is what you need to verify where the problem lies with a hard drive error message.
#1 Run a simple check with the built in windows check disk tool. If the drive really has errors on it running this will show you quickly and allow you to take action before it fails totally.
To run the check disk tool go to the windows start button, then my computer and then click on it and select your hard drive. Right click on it and select tools and then error checking.
Alternative you can go to the windows start menu then go to run and type in "chkdsk /f" without the quotes and then press yes when prompted. You then need to restart your computer to run a check.
If any errors are reported and they are minor this test can mark areas of the drive as bad and attempt to move the data or prevent data being stored there. If the damage is too great then you will just need to replace the drive. If this test does not reveal any errors you may have malware on your PC sending you fake errors.
#2 Check your system log for errors.
To do this go to the start menu and then run and type in "eventvwr" without quotes and press OK. When event viewer stats go to the system tab on the left and click on it. In the right hand pane look for any hard drive errors. If there are none go to the next step.
#3 If the previous steps reveal no errors on your computer it may be malware. If the report of hard drive failure coincides with warnings about viruses and other errors you should do the following. Download a system and registry scanner. This will scan your windows files and the registry files for errors and malware and help you to get rid of them fast. This will also optimize your computer for the best performance and solve any hard drive error messages on your PC.
If this happens to you the first thing you need to do is to verify it is really a hard drive problem and not malware or a software errors on your computer causing this error. If you take your computer to a shop to fix it they may just replace the hard drive when it is not even faulty. Carrying out some simple steps can save you a lot of money and let you get rid of this error fast if it is not a hardware problem.
Here is what you need to verify where the problem lies with a hard drive error message.
#1 Run a simple check with the built in windows check disk tool. If the drive really has errors on it running this will show you quickly and allow you to take action before it fails totally.
To run the check disk tool go to the windows start button, then my computer and then click on it and select your hard drive. Right click on it and select tools and then error checking.
Alternative you can go to the windows start menu then go to run and type in "chkdsk /f" without the quotes and then press yes when prompted. You then need to restart your computer to run a check.
If any errors are reported and they are minor this test can mark areas of the drive as bad and attempt to move the data or prevent data being stored there. If the damage is too great then you will just need to replace the drive. If this test does not reveal any errors you may have malware on your PC sending you fake errors.
#2 Check your system log for errors.
To do this go to the start menu and then run and type in "eventvwr" without quotes and press OK. When event viewer stats go to the system tab on the left and click on it. In the right hand pane look for any hard drive errors. If there are none go to the next step.
#3 If the previous steps reveal no errors on your computer it may be malware. If the report of hard drive failure coincides with warnings about viruses and other errors you should do the following. Download a system and registry scanner. This will scan your windows files and the registry files for errors and malware and help you to get rid of them fast. This will also optimize your computer for the best performance and solve any hard drive error messages on your PC.
No comments:
Post a Comment